Исправление графических проблем Rage

Kane

16:44, 7 октября 2011

Судя по всему у многих людей до сих пор есть проблемы с графическиой стороной в недавно вышедшем шутере Rage от студии id Software. В этом материале я опишу то, как создавать собственный файл конфигурации для игры, который в большинстве случаев помогает справиться с раздражающе медленной загрузкой текстур и ползволят редактировать настройки графики, V-Sync и FOV.

Делается все в два шага:

Создаем текстовый файл с названием "rageConfig.cfg" и наполняем его конфигурацией приведенной ниже.
Копируем его в следующие директории:
одиночная игра - "Steam\steamapps\common\rage\base"
мультиплеер - "Steam\steamapps\common\rage\mp\base"

Прежде чем приводить фал конфигруации пара замечаний:

Во-первых, если вы беспокоетесь относительно возможности быть забаненным системой VAC за редактирование фалов, можете перестать это делать. Никто вас не должен забанить.

Во-вторых, убедитесь в том, что вы установили натсройки видео в режим "Позволить приложению выбрать настройки (или аналог)", иначе новая конфигурация не поможет. Так же, если у вас включен SLI Или Crossfire, отключите.

Нижеприведенные настройки не гарантируют корректную работу Rage. Если у вас все еще есть проблемы, Google Translate в руки, переводите комментарии к различным настройкам и меняйте под себя.

Так же можно посмотреть тему на форуме Steam в которой говорится об этих настройках. Автор конфигурации отмечает, что у него стоит Sapphire Radeon HD 6870 (Black Edition) с драйверами v.11.9 и последним хотфиксом.

Итак, настройки конфигурации (это нужно скопировать в файл rageConfig.cfg) для высокопроизводительных систем:

seta com_videoRam "1024" //sets the Video Card memory Set this to the amount you have in MB
seta com_maxfps "60" //limits the frames to 60 can be changed to what you desire
seta image_anisotropy "16" //Using the highest setting here but you can set as 2, 4 or 8
seta image_usecompression 0 
seta image_filter "GL_LINEAR, GL_LINEAR_MIPMAP_LINEAR" //filtering for light maps
seta image_preload "1" //Use preload images when ever possible
seta image_lodbias "-1" //LoD settings
seta image_ignoreHighQuality "0" //Sets up for using HQ gfx
seta image_ignoreLowQuality "1" //ignores the low textures
seta image_useCache "1" //Enabled Cache to allow the textures to load properly without popping
seta image_cacheMegs "1024" //Cache size in Megabytes
seta image_cacheMinK "10" //Cache minimum size in kilobytes
seta r_aspectRatio "2"  // 0=4:3, 1=16:9, 2=16:10, 3=5:4 TFT, -1 custom
seta r_fullscreen "1"
//seta r_customAspectRatioV "10"
//seta r_customAspectRatioH "16"
seta r_swapInterval 1 //VSYNC 1 enabled, 0 diabled
seta r_useHighQualityPostProcess "1" //Fore High Quality post proccessing
seta r_shadowsHighQuality "1" //Fore High Quality shadows 
seta r_displayRefresh "0" //keep it so the engine doesn't double render a frame
seta r_renderer "best" //highest rendering options
seta r_multiSamples "32" //Set this to 16 or 8 if you're having low-fps as 32 is the Max Multi-sampling
seta r_useHBAO "1" //Ambient occlusion
seta r_useRenderThread "0" // 0 Disable or 1 Enable threaded rendering  useful for newer cards to increase performance.
seta r_visDistMult "1"
seta r_useMotionBlur "1" //use blur
seta r_skipBump "0" 
seta r_skipSpecular "0"
seta r_skipNewAmbient "0"
seta r_shadows "1"
seta r_cgFragmentProfile "best"
seta r_cgVertexProfile "best"
seta vt_lodBias "-1" //LoD settings
//below is cache settings And advanced GFX settings
seta vt_pageimagesizeuniquediffuseonly2 "8192"
seta vt_pageimagesizeuniquediffuseonly "8192"
seta vt_pageimagesizeunique "8192"
seta vt_pageimagesizevmtr "8192"
seta vt_maxPPF 64 //Set this to 64 for Quad-cores CPU's or higher, 16 or 8 for dual-cores CPU's
seta vt_preload "1"
seta vt_filter "GL_NEAREST, GL_NEAREST_MIPMAP_LINEAR"
seta vt_envf "GL_TEXTURE_ENV, GL_TEXTURE_ENV_MODE, GL_MODULATE"
seta vt_blend "GL_NEAREST, GL_NEAREST_MIPMAP_LINEAR"
seta vt_useCache "1"
seta vt_cacheMegs "1024"
seta vt_cacheMinK "10"
seta vt_ignoreHighQuality "0"
seta vt_ignoreLowQuality "1"
seta vt_maxaniso 4 //Set this to 0 if your having lots screen tarring issues and do NOT set this higher then 4 otherwise it will corrupt the Mega-Textures

Настройки конфигурации для средних систем:

seta com_videoRam "1024" //sets the Video Card memory Set this to the amount you have in MB
seta com_maxfps "60" //limits the frames to 60 can be changed to what you desire
seta image_anisotropy "8" //Using the highest setting here but you can set as 2, 4 or 8
seta image_usecompression 0 
seta image_filter "GL_LINEAR, GL_LINEAR_MIPMAP_LINEAR" //filtering for light maps
seta image_preload "1" //Use preload images when ever possible
seta image_lodbias "-1" //LoD settings
seta image_ignoreHighQuality "0" //Sets up for using HQ gfx
seta image_ignoreLowQuality "1" //ignores the low textures
seta image_useCache "1" //Enabled Cache to allow the textures to load properly without popping
seta image_cacheMegs "1024" //Cache size in Megabytes
seta image_cacheMinK "10" //Cache minimum size in kilobytes
seta r_swapInterval 1 //VSYNC 1 enabled, 0 diabled
seta r_aspectRatio "2"  // 0=4:3, 1=16:9, 2=16:10, 3=5:4 TFT, -1 custom
seta r_fullscreen "1"
//seta r_customAspectRatioV "10"
//seta r_customAspectRatioH "16"
seta r_useHighQualityPostProcess "1" //Fore High Quality post proccessing
seta r_shadowsHighQuality "1" //Fore High Quality shadows 
seta r_displayRefresh "0" //keep it so the engine doesn't double render a frame
seta r_renderer "best" //highest rendering options
seta r_multiSamples "16" //Set this to 16 or 8 if you're having low-fps as 32 is the Max Multi-sampling
seta r_useHBAO "1" //Ambient occlusion
seta r_useRenderThread "0" // 0 Disable or 1 Enable threaded rendering  useful for newer cards to increase performance.
seta r_visDistMult "1"
seta r_useMotionBlur "1" //use blur
seta r_skipBump "0" 
seta r_skipSpecular "0"
seta r_skipNewAmbient "0"
seta r_shadows "1"
seta r_cgFragmentProfile "best"
seta r_cgVertexProfile "best"
seta vt_lodBias "-1" //LoD settings
//below is cache settings And advanced GFX settings
seta vt_maxPPF 16 //Set this to 64 for Quad-cores CPU's or higher, 16 or 8 for dual-cores CPU's
seta vt_preload "1"
seta vt_filter "GL_NEAREST, GL_NEAREST_MIPMAP_LINEAR"
seta vt_envf "GL_TEXTURE_ENV, GL_TEXTURE_ENV_MODE, GL_MODULATE"
seta vt_blend "GL_NEAREST, GL_NEAREST_MIPMAP_LINEAR"
seta vt_useCache "1"
seta vt_cacheMegs "1024"
seta vt_cacheMinK "10"
seta vt_ignoreHighQuality "0"
seta vt_ignoreLowQuality "1"
seta vt_maxaniso 4 //Set this to 0 if your having lots screen tarring issues and do NOT set this higher then 4 otherwise it will corrupt the Mega-Textures

Настройки для слабых систем.

seta com_videoRam "1024" //sets the Video Card memory Set this to the amount you have in MB
seta com_maxfps "60" //limits the frames to 60 can be changed to what you desire
seta image_anisotropy "2" //Using the highest setting here but you can set as 2, 4 or 8
seta image_usecompression 0 
seta image_filter "GL_TEXTURE_MAG_FILTER, GL_LINEAR" //filtering for light maps
seta image_preload "1" //Use preload images when ever possible
seta image_lodbias "-1" //LoD settings
seta image_ignoreHighQuality "1" //Sets up for using HQ gfx
seta image_ignoreLowQuality "0" //ignores the low textures
seta image_useCache "1" //Enabled Cache to allow the textures to load properly without popping
seta image_cacheMegs "1024" //Cache size in Megabytes
seta image_cacheMinK "10" //Cache minimum size in kilobytes
seta r_aspectRatio "2"  // 0=4:3, 1=16:9, 2=16:10, 3=5:4 TFT, -1 custom
seta r_fullscreen "1"
//seta r_customAspectRatioV "10"
//seta r_customAspectRatioH "16"
seta r_swapInterval 1 //VSYNC 1 enabled, 0 diabled
seta r_useHighQualityPostProcess "1" //Fore High Quality post proccessing
seta r_shadowsHighQuality "0" //Fore High Quality shadows 
seta r_displayRefresh "0" //keep it so the engine doesn't double render a frame
seta r_renderer "best" //highest rendering options
seta r_multiSamples "8" //Set this to 16 or 8 if you're having low-fps as 32 is the Max Multi-sampling
seta r_useHBAO "0" //Ambient occlusion
seta r_useRenderThread "0" // 0 Disable or 1 Enable threaded rendering  useful for newer cards to increase performance.
seta r_visDistMult "1"
seta r_useMotionBlur "0" //use blur
seta r_skipBump "0" 
seta r_skipSpecular "0"
seta r_skipNewAmbient "0"
seta r_shadows "0"
seta r_cgFragmentProfile "best"
seta r_cgVertexProfile "best"
seta vt_lodBias "-1" //LoD settings
//below is cache settings And advanced GFX settings
seta vt_maxPPF 8 //Set this to 64 for Quad-cores CPU's or higher, 16 or 8 for dual-cores CPU's
seta vt_preload "1"
seta vt_filter "GL_NEAREST, GL_NEAREST_MIPMAP_LINEAR"
seta vt_envf "GL_TEXTURE_ENV, GL_TEXTURE_ENV_MODE, GL_MODULATE"
seta vt_blend "GL_NEAREST, GL_NEAREST_MIPMAP_LINEAR"
seta vt_useCache "1"
seta vt_cacheMegs "1024"
seta vt_cacheMinK "10"
seta vt_ignoreHighQuality "1"
seta vt_ignoreLowQuality "0"
seta vt_maxaniso 2 //Set this to 0 if your having lots screen tarring issues and do NOT set this higher then 4 otherwise it will corrupt the Mega-Textures

Больше статей на Shazoo